Overview | |||||
= Available in Budget Quality as well | |||||
AT 10 - Egla-Twin |
||||||
smooth mesh structure on 1 side | ||||||
effective light reflections | ||||||
very high form stability | ||||||
reduced acoustic reflection | ||||||
view Datasheet | ||||||
AT 11 - Egla-Twin Plain |
||||||
exterior + interior | ||||||
claddings, balustrades | ||||||
partitions | ||||||
view Datasheet | ||||||
AT 15 - Egla-Twin |
||||||
larger mesh width than AT 10 | ||||||
good transparency | ||||||
high form stability | ||||||
view Datasheet | ||||||
AT 20 - Cable Flex |
||||||
exterior + interior | ||||||
claddings | ||||||
partitions | ||||||
view Datasheet | ||||||
AT 32 - Egla-Mono |
||||||
larger mesh width than AT 30 | ||||||
higher form stability than AT 30 | ||||||
view Datasheet | ||||||
AT 35 - Dokawell-Mono |
||||||
larger mesh width than AT 32 | ||||||
higher form stability than AT 32 | ||||||
view Datasheet | ||||||
AT 40 - Dokawell-Mono |
||||||
corrugated surface on both sides | ||||||
high form stability | ||||||
transparency | ||||||
view Datasheet | ||||||
AT 44 - Dokawell-Mono |
||||||
high mesh stability | ||||||
stiff | ||||||
transparency | ||||||
view Datasheet | ||||||
AT 60 - Egla-Mono |
||||||
large single mesh dimension | ||||||
very high form stability | ||||||
not stretchable | ||||||
view Datasheet | ||||||
AT 70 - Egla-Mono |
||||||
very high form stability | ||||||
extra large single mesh | ||||||
pre-crimped wires | ||||||
view Datasheet | ||||||
AT 80 - Dokawell-Duo |
||||||
pre-crimped wires of high form stability | ||||||
view Datasheet | ||||||
AT 90 - Doka-Barette |
||||||
exterior + interior | ||||||
facades | ||||||
claddings | ||||||
partitions | ||||||
view Datasheet | ||||||
AT 95 - Dogla Trio |
||||||
exterior + interior | ||||||
claddings, balustrades | ||||||
partitions | ||||||
slotted tube | ||||||
view Datasheet | ||||||
AT 101 - Multibarrette |
||||||
high stability in weft direction | ||||||
high flexibility in warp direction | ||||||
very narrow radii | ||||||
can be used as rollable sun shades | ||||||
view Datasheet | ||||||
AT 105 - Multibarrette |
||||||
exterior + interior | ||||||
claddings, balustrades | ||||||
partitions | ||||||
slotted tube | ||||||
view Datasheet | ||||||
AT 110 - Multibarrette |
||||||
high stability in weft direction | ||||||
high flexibility in warp direction | ||||||
larger single mesh dimension | ||||||
view Datasheet | ||||||
AT 115 - Multibarrette |
||||||
larger single mesh dimension | ||||||
high stability in weft direction | ||||||
high flexibility in warp direction | ||||||
good transparency and air ventilation | ||||||
view Datasheet | ||||||
AT 120 - Multibarrette |
||||||
large mesh width | ||||||
very good air circulation | ||||||
high transparency | ||||||
view Datasheet | ||||||
LT 42 - Flexomesh |
||||||
texture surface | ||||||
very flexible | ||||||
robust | ||||||
low transparency | ||||||
view Datasheet | ||||||
LT 51 - New Secura |
||||||
very fine material | ||||||
good form stability | ||||||
highly resistant to cutting tools | ||||||
special weave adds a diagonal texture to the mesh |
||||||
view Datasheet | ||||||
LT 55 - Alterna |
||||||
significant textile appeal | ||||||
moderate transparency | ||||||
view Datasheet | ||||||
LT 60 - Chess |
||||||
checker board design | ||||||
similar to LT 55 | ||||||
view Datasheet | ||||||
LT 70 - Miniflex |
||||||
highly flexibility in one direction | ||||||
can be used for sun shading (open area 37%) | ||||||
view Datasheet | ||||||
LT 75 - Dune |
||||||
ceilings, coffered ceilings | ||||||
claddings | ||||||
sun protection | ||||||
partitions | ||||||
view Datasheet | ||||||
LT 120 - Crumpled |
||||||
fine precreased wire cloth | ||||||
high transparency | ||||||
used for interior design, lightning effects | ||||||
view Datasheet | ||||||
|
|||||||
© 2009 IO-Metal Fabrics www.io-metal.com |